Flat Bar

Flat Bars Sizes: 25mm to 250mm (Width) X 6mm to 40mm (Thickness)

Supply Conditions of Flat Bars

  • Flat Bars are available in all grades of Stainless Steel, Alloy Steel, Carbon Steel
  • Flat Bars are available in as rolled (Black) condition only
  • Flat Bars are suitable for sawing or shearing in cold condition
  • Flat Bars have Smooth ends (without burrs) & no sharp edges
  • Flat Bars are suitable for Ring Rolling, Forging, and Up-setting
  • Flat Bars are ultrasonically tested in accordance with ASTM standard
  • Flat Bars are Hard Stamped with Heat Number, Grade and Size
  • Flat Bars are Hard Stamped with Heat Number, Grade and Size
  • Flat Bars are also supplied in Straightened Condition

 

Flat bars Grades

Stainless Steel Grades of Flat Bars

  • AISI 201, 202
  • AISI 301, 302, 303, 304, 304L, 310, 316, 316L, 317, 321, 347
  • AISI 410, 416, 420, 430, 431

Carbon Steel Grades of Flat Bars

  • En8A, En8B, En8C, En8D, En9, C-45, C-50, SA 105
  • CL I, CL II, CL III, CL IV, CL V, CL VI
  • AISI 1008, 1010, 1015, 1018, 1020, 1025, 1030, 1040

Alloy Steel Grades of Flat Bars

  • En15A, En15B, LF2, En201
  • 16MnCr5, 20 MnCr5, En18, En31, AISI 52100
  • AISI 8620, 4130, 4140, 4150
  • En19, En24, En25, En36, En47, En353, En354
  • F-5, F-9, F-11, F-12, F-22

Stainless Steel Flat Bars are gaining popularity into the Architectural & Fabrication sectors. These Flat bars are also widely used in various Structural applications.

Sizes range:

Metric Sizes (mm) Inches Sizes (Inches)
Width Thickness Width Thickness
40 4 to 20 1.1/2 3/16 – 3/4
45 4 to 20 1.3/4 3/16 – 3/4
50 4 to 20 2 3/16 – 3/4
60 5 to 20 2.1/4 3/16 – 3/4
65 5 to 20 2.1/2 3/16 – 3/4
70 5 to 20 2.3/4 3/16 – 3/4
75 5 to 20 3 3/16 – 3/4
80 5 to 20 3.1/4 1/4 – 3/4
90 6 to 20 3.1/2 1/4 – 3/4
100 6 to 20 3.3/4 1/4 – 3/4
120 8 to 25 4 1/4 – 3/4
125 8 to 25 5 3/8 – 1
150 10 to 25 6 3/8 – 1

 

Lengths 3 to 7 Meters or 12 to 24 feet
Bar and Finish Both ends are Color-code, as per the customer’s specific requirement.
Specifications As per EN, DIN, JIS, ASTM, AFNOR, B.S., ASME, NACE, AISI, QQS, MILS, ASM
Special Delivery Condition
(available on request)

Special cut to length with Tolerances of -0, +10 mm (-0, +0.5 inch)
Belt Polished to 240-320 Grit finish.