Round Bars
United Forgings & Bars Pvt Ltd offers Hot Rolled Black Stainless Steel and Alloy Steel Round Bars for forging, upsetting, ring rolling applications. Ring rollers and forgers use this Stainless Steel and Alloy Steel Round bars to produce parts such as gears, bearings and valves. United Forgings maintains consistent diameter along the full length of Stainless Steel and Alloy Steel Round bars which significantly improves the ability to cut parts to exacting weight controls. Stainless Steel and Alloy Steel Round bars have more hot work than cast ingots, which may allow for an increased height to diameter ratio when upset forging. Longer lengths Round Bars can significantly reduce material handling and increases productivity.
United Forgings maintains optimum reduction ratios in Stainless Steel and Alloy Steel Round Bars by selecting the most appropriate Ingot size thereby resulting in better soundness in Stainless Steel and Alloy Steel Round Bars. Stainless Steel and Alloy Steel Round Bars are used by the makers of machined Components, Pump Shafts, Valves, Fasteners, Machine Tools, Daily Equipments, Surgical & Medical Parts, gears, bearings, Thread Bars, Studs, Bolts, Pins, etc.
Round Bars Sizes: 25mm to 156mm
Supply Conditions of Round Bars
Round Bars are available in all grades of Stainless Steel, Alloy Steel, Carbon Steel
Round Bars are available in as rolled (Black) condition only
Round Bars are suitable for sawing or shearing in cold condition
Round Bars have Smooth ends (without burrs) & no sharp edges
Round Bars are suitable for Ring Rolling, Forging, and Up-setting
Round Bars are Ultrasonically tested in accordance with ASTM standard
Round Bars are Hard Stamped with Heat Number, Grade and Size
Round Bars are also supplied in Straightened Condition
Round bars Grades
Stainless Steel Grades of Round Bars
AISI 201, 202
AISI 301, 302, 303, 304, 304L, 310, 316, 316L, 317, 321, 347
AISI 410, 416, 420, 430, 431
Carbon Steel Grades of Round Bars
En8A, En8B, En8C, En8D, En9, C-45, C-50, SA 105
CL I, CL II, CL III, CL IV, CL V, CL VI
AISI 1008, 1010, 1015, 1018, 1020, 1025, 1030, 1040
Alloy Steel Grades of Round Bars
En15A, En15B, LF2, En201
16MnCr5, 20 MnCr5, En18, En31, AISI 52100
AISI 8620, 4130, 4140, 4150
En19, En24, En25, En36, En47, En353, En354
F-5, F-9, F-11, F-12, F-22
United Forgings manufactures Stainless Steel and Alloy Steel Round Bars, which comes in various thickness and dimensions to meet with various industrial usages. United Forgings is Popular for finest quality and superior polish of these Stainless Steel and Alloy Steel Round Bars. United Forgings have developed these Stainless Steel and Alloy Steel Round Bars to the height of excellence to be in sync with set industrial norms. The ultra-modern calibrated testing facilities in United Forgings, ensures roll out of highest quality of Hot Rolled Round Bars. United Forgings manufactures these Stainless Steel and Alloy Steel Round Bars by using hi-tech machineries, which lend these Stainless Steel and Alloy Steel Round bars unique features and make them craze for a lot of prestigious industries. Our rolling mills have a good capability to produce tighter tolerances, for instance half of the standard tolerance. Please contact our sales organization when enquiring and ordering these Hot Rolled Stainless Steel and Alloy Steel Round bars, if tighter tolerances are needed.
The most common length is 6 meters, but it can be varied between 3.5 and 12 meters depending on the producing rolling mill. Heat treatments may restrict the maximum length. Stainless Steel and Alloy Steel Round bar diameter, heat treatment and yield optimization may cause deviation of this common length. 10{99f737c052ff6bc68e833e03d265fa97091e4a9e066178b6fafead2aa49f9f95} of the round bars may be below the minimum of the ordered range, but not less than 3 meters. United Forgings Hot Rolled Black Stainless Steel and Alloy Steel Round bars are Excellent for Threading, Drilling, Machining, & Sawing. Each and every Hot Rolled Round Bars which is manufactured at United Forgings undergoes a rigorous inspection procedure to ensure that our clients get the finest quality.
| Combined Size Range | 4 mm – 300 mm (3/16-4.3/4 inch) |
| Supply Conditions | Cold drawn bars, Centerless ground bars, Peeled & Polished bars, Rough Peeled, Smooth turned bars |
| Tolerances | h9, h10, h11, k12, k13 |
| Lengths | 3 to 7 meters, 12 to 24 feet or customized length as per buyer’s requirement. |
| Heat Treatment | Annealed, Solution Annealed, Quenched & Tempered (QT), Hardened & Tempered |
| Bars End Finish | Chamfered Ends (30, 45, 60 Degrees) Plain ends without Burrs or Sharp Edges |
| Specifications | As per EN, DIN, JIS, ASTM, AFNOR, B.S., ASME, NACE, AISI, QQS, MILS, ASM |
| Special Delivery Condition (available on request) |
Special tolerance -e7, g7, h7, f7, h8, f8, e8, g8 |